Micro Grid Design Form
EV Charging Electrical Contractor Survey & Inspection FormPicture 1: Overhead/Site Map of property- Picture needs to be marked as below (before)
<-- Example of Picture
Please map the property and mark where the source of power is, where the conduit will go and the suggested location option(s) for the station.
Picture 2: Overview (before & after)
<-- Example of Overview Picture
Please take a picture of the install site, standing about 2-4 feet in front of the parking space it will serve.
Picture 3: Side By Side (before & after)
<-- Example of Side by Side Picture
If there are two stations located close to one another, please take a picture like this showing them side by side.
Picture 4: Electric Panel (before)
<-- Example of Electrical Panel Picture
Please take a picture of the electrical panel with the door open and let us know approximate distance from panel to where station will be installed.
Picture 5: Provisioning Sticker (before)
<--Example of Provisioning Sticker
Please take a picture of the provisioning sticker. It’s usually inside the HD box taped to the clear plastic bag or inside the bag.
Picture 6: Screen Close Up (after)
<-- Example of Screen Close Up
Please take a close up picture of the screen (close/clear enough so we can read what it says).
Picture 7: Inside Repeater (after)
<-- Example of Inside Repeater
If a repeater (antennae) was required please include a picture of both the inside and outside repeaters.
Picture 8: Outside Repeater (after)
<-- Example of Outside Repeater
If a repeater (antennae) was required please include a picture of both the inside and outside repeaters.
Picture 9: Outside Accessibility and Path of Travel (to building or sidewalk) if required
<-- Example of P.O.T.
EVCS shall be located on an accessible route to an accessible pedestrian entrance of the EV charging facility. EV Charging Stations. CBC 11B-812